manualshive.com logo in svg

Brother ReChargX RX417XX, Инструкция по эксплуатации, Страница: 7 / 14

Поделиться
Скачать
Brother ReChargX RX417XX Скачать руководство пользователя страница 7

TonerRefillKits.com

   ReChargX

™

 RX417XX

9am - 5pm ET  Mon - Fri 

© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the 

 

V1.0 - 2016.09.28

800.527.3712 or 352.343.7533 

ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved. 

Page 7 of 14

Step 8d: Remove the white drive gear

With the reset gear removed, we will now remove 

the white drive gear (D) (Figure 8-4).

Step 8e: Remove the black drive gear

With the white drive gear removed, now remove the 

black drive gear (E) from the gear train (Figure 8-5).

Step 8f: Remove the small black helical gear

Remove the small, black helical gear located on the 

left side of the cartridge (F) (Figure 8-6).

Step 8g: Remove the toner hopper plug

With the gears out of the way we now have access to 

the toner hopper plug (G) (Figure 8-7).

C

Figure 8-4: 

Removing the white drive gear

D

Figure 8-5: 

Removing the black drive gear

Figure 8-6: 

Removing the small black helical gear

Figure 8-7: 

Locating the toner hopper plug

G

F

D

E

Содержание ReChargX RX417XX















Отзывы:

Нет отзывов