manualshive.com logo in svg

Brother ReChargX RX417XX, Инструкция по эксплуатации, Страница: 6 / 14

Поделиться
Скачать
Brother ReChargX RX417XX Скачать руководство пользователя страница 6

TonerRefillKits.com

   ReChargX

™

 RX417XX

9am - 5pm ET  Mon - Fri 

© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the 

 

V1.0 - 2016.09.28

800.527.3712 or 352.343.7533 

ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved. 

Page 6 of 14

Preparing the TN starter, TN820, TN850, or TN880 

cartridge for refilling and resetting

Step 8a: Remove the reset spring

Remove the reset spring (A) (Figure 8-1).

A spring is not found on the TN starter cartridge. 

Step 8b: Remove the actuator gear

With the reset spring removed, we will now remove 

the white actuator gear (B), exposing the remaining 

gears and toner hopper plug (Figure 8-2).

Step 8c: Remove the reset gear

With the actuator gear removed, we will now remove 

the reset gear (C) from the gear train (Figure 8-3).

Note: The reset gear may vary in color and is not 

found on the TN starter cartridge.

A

Figure 8-1: 

Removing the spring (on models TN820 and TN850)

A

Figure 8-2: 

Removing the actuator gear 

B

Figure 8-3:

 Removing the reset gear (on the TN820 &TN850)

B

A

C

Содержание ReChargX RX417XX















Отзывы:

Нет отзывов