Brother PT-9200PC, Руководство по обслуживанию, Страница: 72 / 93

III - 9
[3] Process of Full or Half Cutter Errors
An error causes LED 1 (red) to light up to disable all operations.
Turning off the ON/OFF switch turns off the power, and the subsequent
pressing of this switch turns on the power to return the cutter to the home
position.
3.2.6 Cassette Detection Sensor Circuit
Fig. 3.2-6 shows the cassette detection sensor circuit.
The sensor board is mounted on the cassette side so that the board turns on the
switch of the cassette sensor which detects the ribbon type and the tape width.
Table 3.2-2 shows the combinations of the cassette.
Fig. 3.2-6 Cassette Detection Sensor Circuit
Cassette type RS10 RS11 RS12 RS13 RS14
No cassette 0 0 0 0 0
6 mm Laminated 0 0 1 0 0
Non-laminated 0 0 1 1 0
9 mm Laminated 1 1 1 0 0
Non-laminated 1 1 0 0 0
12 mm Laminated 0 1 0 0 0
Non-laminated fabric 0 1 1 1 0
18 mm Laminated 1 0 1 1 0
Non-laminated and YS 1 0 0 0 0
Lettering and fabric 1 1 1 0 1
24 mm Laminated 1 0 1 1 1
Non-laminated 1 0 0 0 1
36 mm Laminated 0 0 0 1 0
Table 3.2-2 Combinations of the Cassette