Brother PT-9200PC, Руководство по обслуживанию, Страница: 14 / 93

II - 2
[For non-laminated thermal film tape cassettes]
If the selected heating element(s) generates heat, the thermal film tape
develops itself to produce a dot on the tape. The tape is advanced and the
next printing cycle is repeated, thus forming a character and graphics on the
tape.
When using laminated tape cassettes, instant lettering tape cassettes, or fabric
printing tape cassettes, print data is processed so that a character and
graphics read correctly when viewed from the opposite side of the printing
surface of the tape. (In other words, the mirror image of the character and
graphics is printed.)
[For stamp tape cassettes]
If the selected heating element(s) generates heat, the porous-stamp tape will
be melted so that a pore(s) will be formed in the tape. The tape is advanced
and the next heating cycle is repeated, thus forming a character of pores in the
tape. The printed stamp tape can be used as the face of a stamp. When the
stamp is pressed against the ink-pad, it will absorb ink through the pores.
(3) Character Formation
While the main motor (stepping motor) feeds the tape and ink ribbon (tape only
when using non-laminated thermal film tape cassettes or stamp tape
cassettes) by 0.0705 mm for 3.5 ms, the thermal head generates heat once.
The feed amount of 0.0705 mm is smaller than the width (0.08 mm) of the
heating elements so that the heat generated at one heating cycle will overlap
with the next heating cycle. This forms a character having no gap between
adjacent printed dots.