Brother P-touch PT-D600, Руководство по обслуживанию

Страница: 27 / 171

III - 1
CHAPTER III DISASSEMBLY WITH ASSEMBLING
NOTE

Safety Precautions
(1) You should carry out disassembly & reassembly jobs on an anti-static sheet grounded
correctly. Otherwise, the LSI and other electronic devices will be damaged due to the
electricity charged in your body.
(2) When transporting PCBs, be sure to wrap them in conductive sheets such as
aluminum foil.
(3) When using soldering irons and other heat-generating tools, take care not to damage
the resin parts such as wires, PCBs, and covers.
(4) Be careful not to lose screws, washers, or other parts removed for parts replacement.
(5) Tighten screws to the torque values listed below.

Tightening Torque List
Location Screw type Q'ty Tightening torque
Bottom cover
Blind cover
CAS cover panel
Main PCB ASSY
Frame ASSY
Cutter sensor ASSY
Cutter chassis ASSY
Cutter ASSY
Sensor frame 24B ASSY
Side sensor holder 24B
Upper cover Taptite bind B M2.6 x 10
Taptite bind B M2.6 x 6
Taptite bind B M2.6 x 6
Taptite bind B M2.6 x 6
Taptite bind B M2.6 x 8
Screw PAN M1.7 x 6
Screw bind M3 x 6
Taptite cup S M3 x 5
Screw bind M3 x 4
Taptite PAN B M2.6 x 6
Taptite bind B M2.6 x 6 7
2
4
4
3
1
1
1
2
1
4 0.343 ±0.049 N·m (3.5 ±0.5 kgf·cm)
0.245 ±0.049 N·m (2.5 ±0.5 kgf·cm)
0.245 ±0.049 N·m (2.5 ±0.5 kgf·cm)
0.245 ±0.049 N·m (2.5 ±0.5 kgf·cm)
0.343 ±0.049 N·m (3.5 ±0.5 kgf·cm)
0.098 ±0.049 N·m (1.0 ±0.5 kgf·cm)
0.588 ±0.098 N·m (6.0 ±1.0 kgf·cm)
0.735 ±0.049 N·m (7.5 ±0.5 kgf·cm)
0.588 ±0.098 N·m (6.0 ±1.0 kgf·cm)
0.147 ±0.049 N·m (1.5 ±0.5 kgf·cm)
0.245 ±0.049 N·m (2.5 ±0.5 kgf·cm)