Brother P-Touch PT-2730, Руководство по обслуживанию

Страница: 80 / 105

III - 60
3.3.5 CUT mode ([6] key)
After completion of “PRINT 1 mode”, display the “Figure 3.3-31” by pressing the [6]
key.
Figure 3.3-31
Set the cassette for cut inspection to the machine. Perform the tape feeding by
pressing the below key. (display the “Figure 3.3-32” while feeding.)
* Europe/North America specifications: [OK] / [ENTER]
Figure 3.3-32
Figure 3.3-33
After feeding and cutting, display the “Figure 3.3-33”.
Finish the “CUT mode” by pressing the [OK] / [ENTER] key.
When press the [Space] key after cutting, perform the tape feeding and cutting again.
This inspection mode continues until [OK] / [ENTER] is pressed.
After completion of “CUT mode”, reset the internal RAM and turn off the power
automatically.
FEED&CUT
FEED
SPACE : CONTINUE
ENTER : END