Brother P-Touch E850TKW страница 20 Скачать руководство пользователя

Страница: 20 / 255

Setting Up the P-touch

Feeding Tape

Important

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette.
•

Do not pull the label when the

P-touch

is ejecting it from the tape exit slot.

Doing so will cause the

ink ribbon to be discharged with the tape. The tape may no longer be functional after the ink ribbon
discharges.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.

Feed and Cut

The Feed and Cut function feeds approximately 22.3 mm of blank tape, and then cuts the tape.

Press the

(Feed and Cut) button.

[

Feed & Cut?

] appears on the LCD.

Select [

Feed & Cut

] using the or key, and then press the

Enter

key. The message [

Feeding

Tape... Please Wait

] appears while the tape is fed, and then the tape is cut.

Note

To exit or cancel this function press the

Esc

key.

Feed Only

This function will eject the tape approximately 22.3 mm, resulting in a blank label sticking out of the tape
cassette. This action is recommended when using Fabric tapes, which should be cut using scissors.

Press the

(Feed and Cut) button.

[

Feed & Cut?

] appears on the LCD.

Select [

Feed Only

] using the or key, and then press the

Enter

key. The message [

Feeding

Tape... Please Wait

] appears while the tape is fed.

Note

To exit or cancel this function press the

Esc

key.

Содержание P-Touch E850TKW
































































































































































































































































Результаты поиска

Содержание P-Touch E850TKW

Отзывы:

Похожие инструкции для P-Touch E850TKW

Бренды по названию

Популярные бренды

Brother P-Touch E850TKW, Руководство пользователя

Результаты поиска

Содержание P-Touch E850TKW

Отзывы:

Похожие инструкции для P-Touch E850TKW

Бренды по названию

Популярные бренды