Brother MFC-J6920DW Скачать руководство пользователя страница 297

Страница: 297 / 365

5-26

Confidential

(7) Wait for the machine to automatically return to the initial stage of the maintenance

mode and show "**** Active" on the LCD.

Remove the external memory from the machine and keep it in a safe place.

Note:

If any of the error messages listed below appears, press the

key, and the

machine returns to the initial stage of the maintenance mode.

Restoration Procedure
(1) Insert the external memory containing the backup data into the memory slot of the

machine in the initial stage of the maintenance mode.

The "**** Active" appears on the LCD. ("****" shows the name of the external
memory inserted.)

Note:

- Do not insert more than one external memory at a time.

- If the serial number in the backup data stored in the external memory does

not match that of the machine, data restoration cannot be performed.

(2) Press the

and

keys in this order.

The "Export to Card" appears on the LCD.

(3) Press the or key until the desired item, any of the following, appears on the

LCD.

"Import from Card" for restoring only user setting information

"Import all" for restoring all backup data including machine information

(4) Press the

Mono Start

key.

The "********.msd" appears on the LCD. The "********" is unique to each model.

(5) Press the

Mono Start

key.

The "Import from Card" or "Import all" appears on the LCD again.

(6) Press the

Mono Start

key.

The "Please wait" appears on the LCD.

Note:

Never remove the external memory from the machine when importing is in

progress.

(7) Wait for the machine to automatically return to the initial stage of the maintenance

mode and show "**** Active" on the LCD.

Remove the external memory from the machine and keep it in a safe place.

Note:

If any of the error messages shown in "Backup Procedure" appears, press the

key to return the machine to the initial stage of the maintenance mode.

Error Message

Cause

Card is used

The external memory is being used by another operation.

Insert Card

No external memory is inserted.

No file

The file cannot be opened or no "BROTHER" folder exists.

Card Error

Mismatch between the serial number of the machine and that
of the backup data (which is detected only in data restoration).

Machine ID Error

Mismatch of serial numbers

Write Error

A write error occurs.

Содержание MFC-J6920DW














































































































































































































































































































































































Результаты поиска

Содержание MFC-J6920DW

Отзывы:

Похожие инструкции для MFC-J6920DW

Бренды по названию

Популярные бренды

Brother MFC-J6920DW, Руководство по обслуживанию

Результаты поиска

Содержание MFC-J6920DW

Отзывы:

Похожие инструкции для MFC-J6920DW

Бренды по названию

Популярные бренды