Brother MFC-J4340DW Скачать руководство пользователя страница 456

Страница: 456 / 624

Error Message

Cause

Action

No File

The USB flash drive in the media drive
does not contain a .JPG file.

Reinsert the correct USB flash drive in the
slot.

No Ink Cartridge

An ink cartridge is not installed correctly.

Remove the ink cartridge and re-install it
slowly and firmly until it locks into place.
See

Related Information

Replace the Ink

Cartridges

No Paper Fed
No Paper Fed [Tray 1]
No Paper Fed [Tray 2]

The machine is out of paper or paper is
not correctly loaded in the paper tray.

Do one of the following:
•

Refill the paper tray, and then follow
the LCD instructions.

•

Remove and reload the paper, and
then follow the LCD instructions.

See

Related Information

Load Paper

The paper was not inserted in the centre
position of the manual feed slot.

Remove the paper and reinsert it in the
centre of the manual feed slot, and then
follow the LCD instructions.
See

Related Information

Load Paper in

the Manual Feed Slot

The Jam Clear Cover is not closed
correctly.

Make sure the Jam Clear Cover is closed
evenly at both ends.
See

Related Information

Printer Jam or

Paper Jam

Paper dust has accumulated on the
surface of the paper pick-up rollers.

Clean the paper pick-up rollers.
See

Related Information

Clean the Paper

Pick-up Rollers for Paper Tray #1 or
Clean the Paper Pick-up Rollers for Paper
Tray #2

No Response
Please disconnect USB
device.

The connected USB device is
unresponsive.

Unplug the device from the USB direct
interface.

No Response/Busy

The number you dialled does not answer
or is busy.

Verify the number and try again.

Out of Fax Memory

The fax memory is full.

Do one of the following:
•

Clear the data from the memory. To
gain extra memory, you can turn off
Memory Receive.
See

Related Information

Turn Off

Memory Receive

•

Print the faxes that are in the memory.
See

Related Information

Print a Fax

Stored in the Machine's Memory

Out of Memory

The machine's memory is full.

If a fax-sending or copy operation is in
progress:

•

Press

Quit

and wait until the

other operations that are in progress
finish, and then try again.

•

Press

Partial Print

to copy the

pages scanned so far.

•

Clear the data stored in the memory.
To gain extra memory, you can turn
Memory Receive off.
See

Related Information

Turn Off

Memory Receive

•

Print the faxes stored in the memory.

449

Содержание MFC-J4340DW
















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MFC-J4340DW

Отзывы:

Brother MFC-J4340DW, Онлайн руководство пользователя, Страница: 456 / 624

Результаты поиска

Содержание MFC-J4340DW

Отзывы: