Brother MFC-J4340DW Скачать руководство пользователя страница 449

Страница: 449 / 624

Error Message

Cause

Action

Repairs resulting from the use of non-
Brother supplies may not be covered
under the stated product warranty.

Ink Low

The ink level is low. If the sending
machine has the ability to convert it, the
colour fax will be printed at your machine
as a monochrome fax.

Prepare a new ink cartridge. You can
continue printing until the LCD displays

Replace Ink

See

Related Information

Replace the Ink

Cartridges

•

You can still scan even if the ink is
low or needs to be replaced.

Jam Front
Repeat Jam Front

The paper is jammed in the machine.

Gently remove the jammed paper.
See

Related Information

Paper is

Jammed in the Front of the Machine (Jam
Front)

Make sure the paper guides are set to the
correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper.

Jam Inside/Front
Repeat Jam

The paper is jammed in the machine.

Gently remove the jammed paper.
See

Related Information

Paper is

Jammed Inside and in the Front of the
Machine (Jam Inside/Front)

Make sure the paper guides are set to the
correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper.

More than one sheet of paper was placed
in the manual feed slot.
-

Another sheet of paper was placed in the
manual feed slot before the LCD
displayed

Insert one sheet at a

time.

Do not put more than one sheet of paper
in the manual feed slot at any one time.
Wait until the LCD displays

Insert one

sheet at a time.

before you feed the

next sheet of paper in the manual feed
slot.
Gently remove the jammed paper.
See

Related Information

Paper is

Jammed Inside and in the Front of the
Machine (Jam Inside/Front)

Jam Rear

The paper is jammed in the machine.

Gently remove the jammed paper.
See

Related Information

Paper is

Jammed in the Back of the Machine (Jam
Rear / Jam Tray2)

Make sure the paper guides are set to the
correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper.

Paper dust has accumulated on the
surface of the paper pick-up rollers.

Clean the paper pick-up rollers.
See

Related Information

Clean the Paper

Pick-up Rollers for Paper Tray #1

Low Temperature

The room temperature is too low.

After warming the room, allow the
machine to warm up to room temperature.
Try again when the machine has warmed
up.

No Caller ID

There is no incoming call history. You did
not receive calls or you have not
subscribed to the Caller ID service from
your telephone company.

To use the Caller ID feature, contact your
telephone company.
See

Related Information

Caller ID

442

Содержание MFC-J4340DW
















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MFC-J4340DW

Отзывы:

Brother MFC-J4340DW, Онлайн руководство пользователя, Страница: 449 / 624

Результаты поиска

Содержание MFC-J4340DW

Отзывы: