manualshive.com logo in svg

Brother MFC-9750, Руководство пользователя

Поделиться
Скачать
Brother MFC-9750 Скачать руководство пользователя страница 60

54

C H A P T E R

E I G H T

ERROR MESSAGE

CAUSE

ACTION

COVER OPEN

The front cover was not completely closed.

Open, then close the front cover.

DOCUMENT JAM

Documents were not inserted or fed

Do not pull paper out until you see

properly or document was too long.

“Document Jams and Paper Jams” in
this chapter.

MACHINE ERROR XX

MFC has a mechanical problem

Cut the power off. Then contact your
Brother dealer for service.

MEMORY FULL

You can’t store data in the memory.

See “If You Get a Memory Full
Message” in chap. 3.

PLS CLEAN DRUM

The primary corona wire of drum unit is

Clean the primary corona wire of drum

dirty.

unit.

PLS OPEN COVER

A page, piece of paper or  paper clip, etc.

Open the front cover. If you see any

may be jammed inside the machine.

jammed paper or other item, gently pull
it out, then close the front cover. If the
error message remains, open and close
the front cover again. If the machine
cannot reset itself and return to the
ready prompt, it will display
MACHINE ERROR XX. Please call
your Brother dealer for service.

PRINTER JAM

The recording paper is jammed  in the MFC.

See Printer Jam in this chapter.

TONER EMPTY

Toner cartridge is not installed. Toner is

Reinstall the toner cartridge. Replace

used up and printing is not possible.

the toner cartridge with a new one. (See
“Replacing the Toner Cartridge” in this
chapter).

CHANGE TONER

If the display shows CHANGE TONER

Order a new toner cartridge now.

and at the same time the Toner Empty LED
on the control panel flashes on and off, you
can still print. But the toner is depleted and
the machine is telling you that the toner will
soon run out.

Содержание MFC-9750

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды