Brother MFC-8220 Скачать руководство пользователя страница 37

Страница: 37 / 328

MFC-8220

SERVICE MANUAL

2-13

3.2

Installing the Driver & Software

3.2.1

For USB Interface Cable Users (For Windows

98/98SE/Me/2000 Professional/XP)

(1) Switch off and unplug the machine from the AC outlet and disconnect it from your

computer, if you already connected an interface cable.

(2) Turn on your computer.

(For Windows

2000 Professional/XP, you must be logged on as the administrator.)

(3)

Insert the supplied CD-ROM for Windows

into your CD-ROM drive. If the model name

screen appears, select your machine. If the language screen appears, select your
language.

(4)

The CD-ROM main menu will appear.

Click

Install Software

NOTE:

If this window does not appear, use Windows

Explore to run the

setup.exe

program

from the root directory of the Brother CD-ROM.

(5) Click

MFL-Pro Suite

in Main Application.

NOTE:

•

MFL-Pro Suite includes Printer Driver, Scanner Driver, ScanSoft

PaperPort

ScanSoft

Text Bridge

, PC-FAX software, Remote Setup and True Type fonts.

•

PaperPort

is a document management application for viewing scanned documents.

•

ScanSoft

TextBridge

, which is integrated into PaperPort

, is an OCR application that

converts an image into text and inserts it into your default word processor.

(6) Click

Install

NOTE:

•

If you see the following screen, click

to install the Windows

updates. After the

updates are installed your PC may restart.

•

If it does the installation will automatically continue.

•

If the installation does not continue automatically, please open the installer menu again
by double-clicking the

setup.exe

program from the root directory of the Brother CD-

ROM, and continue from Step (4).

(7) When

the

PaperPort 8.0 SE Setup

window is displayed, click

Next

(8)

After reading and accepting the ScanSoft

License Agreement, enter your user

information and click

Next

(9) Select

Typical

and click

Next

(10) Click

Install

and PaperPort

will start installing on your computer.

(11) When

the

PaperPort 8.0 SE Registration

screen is displayed, make your selection and

follow the on-screen instructions.

(12) Click

Finish

to complete installation.

(13) When

the

Brother MFL-Pro Suite Installation

window appears, click

Next

NOTE:

•

If an error message appears at this point in the installation process, or if you have
previously installed the MFL-Pro Suite, you will first have to uninstall it.

•

From the

Start

menu, select

Programs, Brothe

Brother MFL-Pro Suite

Uninstall

and then follow the instructions on the screen.

(14) When the Brother Software License Agreement window appears, click

Yes

Содержание MFC-8220









































































































































































































































































































































Результаты поиска

Содержание MFC-8220

Отзывы:

Похожие инструкции для MFC-8220

Бренды по названию

Популярные бренды

Brother MFC-8220, Руководство по обслуживанию

Результаты поиска

Содержание MFC-8220

Отзывы:

Похожие инструкции для MFC-8220

Бренды по названию

Популярные бренды