Brother MFC 4550, Руководство по обслуживанию

Страница: 124 / 191

V –
42
Function
Selector
No.
Setting and Specifications
No. 1 2 3
0 0 0 : -38.0 dBm (A)
0 0 1 : -39.5 dBm (B)
0 1 0 : -41.0 dBm (C)
0 1 1 : -42.5 dBm (D)
1 0 0 : -44.0 dBm (E)
1 0 1 : -45.5 dBm (F)
1 1 0 : -47.0 dBm (G)
1 1 1 : -48.5 dBm (H)
Detection level of dial tone or
busy tone for the built-in TAD
operation
WSW30
(Function setting 8)
1
2
3
5 Speaker output level
0: Higher 1: Lower
4 Not used.
No. 6 7
0 0 : A
0 1 : B
1 x : C
Cooling fan control mode
6
7
Not used.
8
0
(Higher)
1
(Lower)
Speaker Volume Switch Position
Selector 5 of WSW30
HIGH Medium-High High
LOW Medium-Low Low
●
Selectors 1 through 3: Detection level of dial tone or busy tone for built-in TAD operation (For
those models equipped with a built-in TAD)
If dial tone or busy tone inputted during ICM recording is below the level specified by these
selectors, the TAD stops recording and disconnects the line.
●
Selector 5: Speaker output level (For those models equipped with a built-in TAD)
This selector determines the speaker output level when the speaker volume switch is set to
HIGH or LOW, as listed below.