Brother LH4-B800E, Руководство по обслуживанию

Страница: 84 / 168

LH4-B800E
3 - 29
3. ASSEMBLY
Check that the notches (A) of the plungers
q
and the lower shaft
w
are aligned, and then insert the two plungers
q
and the two compression springs
e
into the bush
r
and secure them with the two screws
t
.
Insert the oil tube
y
into the lubricating hole to the right of the bush
r
. Insert the oil tube
u
that is connected between
the plunger and the filter into the lubricating hole to the left of the bush
r
.
Insert the oil tube
!1
into the lubricating hole to the right of the bush
r
. Pass the outlet of the oil tube
!1
through the
tube support
!2
. Secure the tube support
!2
to the bed with the screw
!3
. Insert the oil tube
!4
that is connected
between the oil terminal and the plunger pump through the lubricating hole to the left of the bush
r
.
Pass the oil tube
!6
that is connected between the oil terminal and the oil outlet through tube support D
!5
. Secure
tube support D
!5
to the bed with the screw
!7
.
Secure the four tubes that are coming out from the bush
r
to the bed in two places as shown in the illustration with the
cord holder
i
, screw
o
and plain washer
!0
.
Install the pump filter
!8
to the oil filter bracket
@1
with the two springs
!9
and the two screws
@0
.
Insert the oil tube oil tube
u
that is connected between the plunger and the filter through the oil filter bracket
@1
. Install
the oil filter bracket
@1
to the bed with the three screws
@2
.
Plunger pump mechanism
t
r
e
w
q
!0 o
i
u
y
!4 !1
!3
!2
!1
!7
!6
!0 o
i
u
@0
!9
!8
@2
@0
!9
@2
@1
!5
w
q
r
!0 o
i
(A)
r