manualshive.com logo in svg

Brother Laser MFC-4800, Руководство по обслуживанию

Поделиться
Скачать
Brother Laser MFC-4800 Скачать руководство пользователя страница 46

4-11

 10) Press the lock arm provided at the left inside of the ASF to the rear with a screwdriver, slide

the ASF chute ASSY to the left, and take it out to the front.

NOTE:

 To replace only the black film attached to the chute, do not remove the ASF chute

ASSY from the ASF.

NOTE: 

A new chute and black film will be provided separately. When replacing the chute

ASSY, first set the chute into the ASF and then attach the black film to the chute. If you first

attach the black film to the chute and then set the ASF chute ASSY, then the black film may

be bent or wrinkled.

Reassembling Notes

• Set the paper feed roller into the ASF with the D-shaped end facing leftwards.
• Set the paper pull-in roller into the ASF with the D-shaped end facing leftwards.
• When setting the release lever back into place, turn the release cam to the rear and then set the

release lever so that the bottom end of the release lever comes in the front of the boss provided

on the ASF as illustrated on page 4-7.

Содержание Laser MFC-4800














































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды