Brother IntelliFAX 2480C, Руководство пользователя

Страница: 111 / 164

Troubleshooting and Routine Maintenance
95
Receiving Faxes
Difficulty Suggestions
Cannot receive a fax Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup. (See
Receive modes on page 35.)
If you often have interference on the phone line, try changing the menu setting of
Compatibility to
Basic
. (See Phone line interference on page 104.)
Sending Faxes
Difficulty Suggestions
Cannot send a fax Check all line cord connections.
Make sure that the Fax key is illuminated. (See Entering Fax mode on
page 28.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See Reports
on page 69.)
Transmission Verification Report
says ‘Result:NG’ or
‘Result:ERROR’. There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get ‘Result:NG’ on the Transmission
Verification Report, your machine may be out of memory. If the problem continues,
ask the telephone company to check your phone line.
If you often get transmission errors due to possible interference on the phone line,
try changing the menu setting of Compatibility to
Basic
. (See Phone line
interference on page 104.)
Poor fax send quality. Try changing your resolution to
Fine
or
S.Fine
. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See
Cleaning the scanner on page 107.)
Vertical black lines when sending. If the copy you made shows the same problem, clean the scanner. (See Cleaning
the scanner on page 107.)