Brother HL-S7000DN Series Скачать руководство пользователя страница 368

Страница: 368 / 460

4-25

Confidential

4.2 Removal of Supply Pump ASSY

(1) Remove the supply pump ASSY while disassembling the sub tank ASSY.

(2) Remove the supply pump ASSY from the sub tank ASSY, and wrap the joint of the tube in

a clean, lint-free cloth.

4.3 Attachment of Supply Pump ASSY

(1) After attaching a new sub tank ASSY, attach a new supply pump ASSY. Do not reuse the

removed supply pump ASSY.

4.4 Supply of Ink to Sub Tank ASSY and Check of Ink Leak

(1) Open the ink cartridge cover and turn ON the machine. If an ink cartridge is mounted,

remove it.

(2) Enter the maintenance mode, and press the

and

buttons in this order.

"PlatenPosition" is displayed on the LCD.

(3) Mount an ink cartridge, select "Needle" using the

button, and press the

button.

(4) Select "INSERT" using the

button, and press the

button. The needle moves to the

insertion position.

(5) Select "InkSupply" using the

button, and press the

button.

(6) Select "Supply (BK)" using the

button, and press the

button. The machine starts

supplying ink. If leakage of ink is found, press the

Cancel

button to stop supplying ink

and repair the location from which ink leaks.

(7) When the machine finishes supplying ink, select "InkSupply" again using the

button,

and press the

button.

(8) Select "Supply (PRE)" using the

button, and press the

button. The machine starts

supplying pre-coat ink. If leakage of ink is found, press the

Cancel

button to stop

supplying pre-coat ink and repair the location from which ink leaks.

(9) Turn the power OFF and ON.

4.5 Missing Dot Check (Maintenance Mode: Code 68)

(1) Press the

and

buttons in this order in the initial state of the maintenance mode.

The machine displays "Printing" on the LCD and starts printing the missing dot check
pattern.

(2) Check that all dots are printed in the missing dot check pattern.

(3) If there is a missing dot(s), perform an appropriate purge operation in

"Function mode 17"

and print and check the pattern again.

(4) If all dots are printed, the missing dot check is finished.

(5) Press the

button twice. The maintenance mode exits from the maintenance mode and

return to the ready state.

Содержание HL-S7000DN Series













































































































































































































































































































































































































































































Результаты поиска

Содержание HL-S7000DN Series

Отзывы:

Похожие инструкции для HL-S7000DN Series

Бренды по названию

Популярные бренды

Brother HL-S7000DN Series, Руководство по обслуживанию

Результаты поиска

Содержание HL-S7000DN Series

Отзывы:

Похожие инструкции для HL-S7000DN Series

Бренды по названию

Популярные бренды