Brother HL-S7000DN Series Скачать руководство пользователя страница 351

Страница: 351 / 460

4-8

Confidential

2.1 Draining Ink from Head (Maintenance Mode: Code 17)

(1) Remove the ink cartridge, and then close the ink cartridge cover.

(2) Enter the maintenance mode, and press the

and

buttons in this order. "Cartridge" is

displayed on the LCD.

(3) Press the

button to display "No Cartridge" on the LCD and press the

button.

(4) Press the

button to display "Power_P_ALL" on the LCD and press the

button.

(5) The machine displays "EXECUTING" on the LCD and starts draining ink from the head.

(6) After a little while, the machine displays "COMPLETED" on the LCD and finishes draining

ink from the head.

(7) Press the

button. "MAINTENANCE" is displayed on the LCD.

(8) Repeat steps (2) to (7). (Twice)

(9) Press the

and

buttons in this order.

(10) The machine display "PlatenPosition" on the LCD and press the

button.

(11) When "Needle" is displayed, press

, and then "INSERT" is displayed.

(12) Press the

button.

(13) Press

to display "Needle" and press the

button, then "InkSupply" is displayed.

(14) Press the

button several times until "Supply (BK)" is displayed on the LCD, and then

press the

button.

(15) Press the

button several times until "Supply (PRE)" is displayed on the LCD, and then

press the

button.

(16) Turn the power OFF.

2.2 Supplying Ink to Head and Checking Ink Leak

(Maintenance Mode: Code 18)

(1) Turn the power ON.

(2) Although an ink cartridge is set, the cartridge cover remains open.

(3) Enter the maintenance mode, and press the

and

buttons in this order.

"PlatenPosition" is displayed on the LCD.

(4) Close the cartridge cover.

(5) Perform steps (10) through (16) in 2.1.

(6) Turn ON the power, enter the maintenance mode, and press the

and

buttons in this

order. "Cartridge" is displayed on the LCD.

(7) Press the

button. The machine display "eINIT_P_ALL" on the LCD and press the

button.

(8) The machine displays "EXECUTING" on the LCD and starts supplying ink to the head.

(9) After a little while, the machine displays "COMPLETED" on the LCD and finishes

supplying ink to the head.

(10) Press the

button to return to the initial state of the maintenance mode.

Содержание HL-S7000DN Series













































































































































































































































































































































































































































































Результаты поиска

Содержание HL-S7000DN Series

Отзывы:

Похожие инструкции для HL-S7000DN Series

Бренды по названию

Популярные бренды

Brother HL-S7000DN Series, Руководство по обслуживанию

Результаты поиска

Содержание HL-S7000DN Series

Отзывы:

Похожие инструкции для HL-S7000DN Series

Бренды по названию

Популярные бренды