Brother HL-L2310D, Онлайн руководство пользователя

Страница: 241 / 264

Level 1 Level 2 Description
HP LaserJet Symbol Set
Select the symbol or character set.
Table Print Print the code table.
Auto LF ON: CR -> CR+LF, OFF: CR -> CR
Auto CR ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP Choose whether a line feed and carriage return will happen when the
machine reaches the right margin.
Auto SKIP Choose whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
Bottom
Margin Set the bottom margin distance from the bottom edge of the paper.
Lines Set the number of lines on each page.
Tray Command Select this setting if a tray mismatch appears when you use the HP
drivers.
BR-Script 3
(Available only for certain
models)
Error Print Choose whether the machine prints the error information when errors
occur.
All other models
Level 1 Level 2 Description
Test Print
- Print a test page.
2-sided
(For automatic 2-sided
printing models)
2-sided
Print Turn 2-sided printing off or on and select flip on long edge or short edge.
Single
Image For a print job where the last page is a 1-sided image, select the
1-
sided Feed
option to reduce printing time.
Auto Continue - Select if you want the machine to clear paper size errors or media type
errors automatically.
Print Position X Offset Move the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset Move the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
[Network]
(HL-L2350DW/HL-L2351DW)
Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN TCP/IP Boot
Method - Choose the IP method that best suits your
needs.
IP Address - Enter the IP address.
Subnet
Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Config - Select the WINS configuration mode.
237