manualshive.com logo in svg

Brother HL HL-1060, Руководство по обслуживанию, Страница: 3 / 105

Поделиться
Скачать
Brother HL HL-1060 Скачать руководство пользователя страница 3

PREFACE

This service manual contains basic information required for after-sales service of the laser printer
(here- in-after referred to as "this machine" or "the printer"). This information is vital to the service
technician to maintain the high printing quality and performance of the printer.

This service manual covers the HL-1060 laser printer.

This manual consists of the following chapters:

CHAPTER

 

I :

FEATURES AND SPECIFICATIONS

Features, specifications, etc.

CHAPTER II

 

: THEORY OF OPERATION

Basic operation of the mechanical system, the electrical system and the electrical
circuits, and their timing information.

CHAPTER III : DISASSEMBLY AND REASSEMBLY

Procedures for disassembling and reassembling the mechanical system.

CHAPTER IV : MAINTENANCE AND TROUBLESHOOTING

Reference values and adjustments, troubleshooting image defects, troubleshooting
malfunctions, etc.

APPENDICES :SERIAL NO. DESCRIPTIONS, CONNECTION DIAGRAMS, PCB CIRCUIT

DIAGRAMS.

Information in this manual is subject to change due to improvement or re-design of the product. All
relevant information in such cases will be supplied in service information bulletins (Technical
Information).

A thorough understanding of this printer, based on information in this service manual and service
information bulletins, is required for maintaining its print quality performance and for improving the
practical ability to find the cause of problems.

Содержание HL HL-1060










































































































Отзывы:

Нет отзывов