Brother HL-3070CW, Быстрая настройка

Страница: 39 / 54

39
Macintosh Wireless Network
Wind
ows
®
M
acintosh
Wireless Netw
ork
Configuration in the Infrastructure mode using SES/WPS or AOSS from
the control panel menu
10
Configure the wireless
settings
If your wireless access point/router supports either
SecureEasySetup™, Wi-Fi Protected Setup (PBC
1
)
or AOSS™, you can configure the printer easily
without knowing your wireless network settings. Your
printer has the SES/WPS/AOSS menu on the control
panel. This feature automatically detects which mode
your access point uses, SecureEasySetup™, Wi-Fi
Protected Setup or AOSS™. By pushing a button on
the wireless access point/router, you can setup the
wireless network and security settings. See the user’s
guide for your wireless access point/router for
instructions on how to access one-push mode.
1
Push Button Configuration
a
Make sure the printer power switch is on.
b
Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
c
Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
d
Click Install Printer Driver on the menu
screen.
e
Click Wireless Network users .
Note
Access points or routers that support
SecureEasySetup™, Wi-Fi Protected Setup or
AOSS™ have the symbols shown below.