Brother HL-2400Ce Series, Руководство пользователя

Страница: 224 / 256

APPENDICES
Appendix–7
5. Envelopes with clasps, snaps or tie strings.
6. Envelopes made with smooth or shiny paper.
7. Envelopes that are rough, highly textured, or deeply embossed.
8. Envelopes that do not lie flat or that are curled, wrinkled, or
irregularly shaped.
9. Envelopes having an open flap with an adhesive that seals the
envelope.
USE OF ANY OF THE ENVELOPES LISTED ABOVE MAY
CAUSE DAMAGE TO YOUR PRINTER. SUCH DAMAGE IS
NOT COVERED UNDER ANY WARRANTY OR SERVICE
AGREEMENT.
✒
Note
The manufacturer neither warrants nor recommends the use of a particular
envelope because envelope properties are subject to change by the
envelope manufacturer. The entire responsibility for the quality and
performance of the envelope lies with the customer.
■ ■ ■ ■
LABELS AND OVERHEAD TRANSPARENCIES
The printer will print on most type of labels and transparencies designed
for use with a laser printer. Labels should have an adhesive that is acrylic-
based since such material is more stable at the high temperatures in the
fusing unit. Adhesives should not come in contact with any part of the
printer, because the label stock may stick to the drum or rollers and cause
jams and print quality problems. No adhesive should be exposed between
the labels. Labels should be arranged so that they cover the entire page
with the only exposed spaces being lengthwise down the sheet. Using
labels with spaces may result in labels peeling off and causing serious jam
or print problems.
All labels and transparencies used in this printer must be able to withstand
a temperature of 200 degrees centigrade (392 degrees Fahrenheit) for a
period of 0.1 seconds.
Label and transparency sheets should not exceed the paper weight
specifications described in the User’s Guide. Labels and transparencies
exceeding this specification may not feed or print properly and cause
damage to your printer.
The entire responsibility for the quality and performance of labels and
transparencies lies with the customer.
DAMAGE CAUSED BY THE USE OF UNSATISFACTORY
LABELS OR TRANSPARENCIES IS NOT COVERED UNDER
ANY WARRANTY OR SERVICE AGREEMENTS.