Brother HL-2260 Скачать руководство пользователя страница 146

Страница: 146 / 205

4-4

Confidential

1.2.2 Installing firmware

<Operating Procedure>

Note:

• DO NOT disconnect the power cord or USB cable from the machine or computer

during installing.

• If the install is failed, turn OFF the machine and turn it back on. The machine enters

the firmware installing mode automatically. Continue to the operating procedure

below.

LED models
(1) Open the front cover while the power

switch is turned OFF.

(2) Press and hold the [Go] key, and turn

ON the power switch. The Toner,

Drum, and Paper LEDs light.

(3) Release the [Go] key. All LEDs go out.
(4) Press and hold the [Go] key for more

than two seconds until the Ready and

Paper LEDs light. Release the [Go]

key and close the front cover.

(5) Connect the machine to your

computer using the USB cable.

(6) Open the temporary folder and

double-click "FILEDG32.EXE" to start

it, and select "Brother Maintenance

USB Printer".

(7) Drag and drop the required program

file (ex: LZXXXX_$.djf) in the same

folder onto the "Brother Maintenance

USB Printer" icon. The file is loaded to

the machine, and installing to the flash

ROM starts.

(8) When installing is completed, the

machine restarts and returns to the

ready state automatically.

(9) Turn OFF the power switch of the

machine, and then repeat the

procedures (1) to (8) to install required

firmwares.

(10) Turn OFF the power switch of the

machine, and disconnect the USB

cable.

LCD models
(1) Press the [OK] key and then the [Go]

key while the machine is in the ready

state. Then, press the [▲] key four

times to enter the maintenance mode.

(2) Connect the machine to your

computer using the USB cable.

(3) Open the temporary folder and

double-click "FILEDG32.EXE" to start

it, and select "Brother Maintenance

USB Printer".

(4) Drag and drop the required program

file (ex: LZXXXX_$.djf) in the same

folder onto the "Brother Maintenance

USB Printer" icon. The file is loaded to

the machine, and installing to the flash

ROM starts.

(5) When installing is completed, the

machine restarts and returns to the

ready state automatically.

(6) Repeat the procedures (1) to (5) to

install required firmwares.

(7) Turn OFF the power switch of the

machine, and disconnect the USB

cable.

Содержание HL-2260














































































































































































































Результаты поиска

Содержание HL-2260

Отзывы:

Бренды по названию

Популярные бренды

Brother HL-2260, Руководство по обслуживанию

Результаты поиска

Содержание HL-2260

Отзывы:

Бренды по названию

Популярные бренды