Brother GTX pro Bulk, Руководство по установке

Страница: 13 / 44

2
 When installing the printer, avoid any place that presents
direct sunlight or a large amount of dust.
 The body size is 70 in. (width) x 51.2 in. (depth) x 47.6 in.
(height) (178 cm (width) x 130 cm (depth) x 121 cm (height))
and the mass weighs 171 kg (377 lb).
 Do not use an extension cable.
 Ensure ample work space of over 39.4 in. (100 cm) in front of
and to each side of the printer is available. Also, as a space
to install the rear cover, keep 15.7 in. (40 cm) or wider space
in the back of the printer. Keep 17.7 in. (45 cm) or wider
space in the ceiling direction as well. As the air is exhausted
toward the rear side, keep 7.9 in. (20 cm) or more space from
the exhaust opening. If this space is not secured, you will
have to move peripherals or the printer when making a
repair.
 When installing the printer, place a level gauge on the top
surface of the cover and the top surface of the platen to
make adjustments so that the main unit is set horizontally.
 In preparation for a major earthquake or other natural
disasters, fix the table and the main unit with a tool like a
fixing band to prevent the main unit from falling from the
table.
 Place the tank unit on the table and align the main body and
tank unit front legs with the frame corner.
IMPORTANT
Do not turn on the power until "P.6 Removing
the protection materials" is completed.
Otherwise the printer may fail.
Unpacking
2
X0381