Brother FAX-615, Руководство по обслуживанию

Страница: 93 / 123

V – 41
WSW10
(Protocol definition 2)
Function
Selector
No.
Setting and Specifications
Switching of DPS, following the
CML ON/OFF
1
Time length from transmission
of the last dial digit to CML ON
Time length from CML ON to
CNG transmission
3
Time length from CML ON to
CED transmission (except for
facsimile-to-telephone switching)
●
Selector 1: Switching of DPS, following the CML ON/OFF
Setting this selector to "1" switches DPS automatically following the CML ON/OFF operation.
This function is provided to conform to the Swedish standard.
●
Selector 2: Time length from transmission of the last dial digit to CML ON
This selector sets the time length from when the equipment transmits the last dial digit until
the CML relay comes on.
●
Selector 3: Time length from CML ON to CNG transmission
This selector sets the time length until the equipment transmits a CNG after it turns ON the
CML relay.
●
Selector 4: Time length from CML ON to CED transmission
This selector sets the time length until the equipment transmits a CED after it turns ON the
CML relay. This setting does not apply to switching between facsimile and telephone.
●
Selectors 5 and 6: No. of training retries
These selectors set the number of training retries to be repeated before automatic fallback.
2
0: No 1: Yes
0: 100 ms 1: 50 ms
0: 2 sec. 1: 4 sec.
4 0: 0.5 sec. 1: 2 sec.
5
6
No. of training retries
No. 5 6
0 0 : 1 time
0 1 : 2 times
1 0 : 3 times
1 1 : 4 times
Not used.
7
8 Not used.