Brother FAX-615, Руководство по обслуживанию

Страница: 116 / 123

V – 64
WSW34
(Function setting 12)
Function
Selector
No.
Setting and Specifications
No. 1 2 3
0 0 0 : 0 second
0 0 1 : 1 second
0 1 0 : 2 seconds
0 1 1 : 3 seconds
1 0 0 : 4 seconds
1 0 1 : 5 seconds
1 1 0 : 6 seconds
1 1 1 : 7 seconds
1
2
3
No. of CNG cycles to be detected
(when the line is connected via
the external telephone in the
external TAD mode or via the
facsimile equipment in F/T or TAD
mode)
ICM recording time to be erased
preceding the tone detection
when the equipment automatically
disconnects the line because no
voice signal has been received
Not used.
8
4
5
No. 4 5
0 0 : 0.5 (A)
0 1 : 1 (B)
1 0 : 1.5 (C)
1 1 : 2 (D)
●
Selectors 1 through 3: ICM recording time to be erased preceding the tone detection (For
those models equipped with a built-in TAD)
●
Selectors 4 and 5: No. of CNG cycles to be detected (For the FAX725M/590DT/590MC/825MC/
875MC)
The equipment interprets CNG as an effective signal if it detects CNG signal by the number
of cycles specified by these selectors in any of the following cases:
• when the line is connected via the external telephone in the external TAD mode.
• when the line is connected via the facsimile equipment in F/T or TAD mode.
●
Selectors 6 and 7: Number of DTMF tone signals for inhibiting the detection of CNG during
external TAD operation
If the equipment receives this specified number of DTMF tone signals during external TAD
operation, it will not detect CNG afterwards.
If these selectors are set to “1, 1”, the CNG detection will not be inhibited.
6
7
No. 6 7
0 0 : 3
0 1 : 2
1 0 : 1
1 1 : OFF
Number of DTMF tone signals for
inhibiting the detection of CNG
during external TAD operation