Brother FAX 560, Руководство по обслуживанию

Страница: 78 / 194

V - 6
3.2 Printout of Scanning Compensation Data
Function
The equipment prints out the white and black level data for scanning compensation.
Operating Procedure
Do not start this function merely after powering on the equipment but start it after carrying out a
sequence of scanning operation. Unless the equipment has carried out any scanning operation,
this function cannot print out correct scanning compensation data. This is because at the start of
scanning operation, the equipment initializes white and black level data and takes in the scanning
compensation reference data.
(1) Press the 0 and 5 keys in this order in the initial stage of the maintenance mode.
The "WHITE LEVEL 1" will appear on the LCD.
(2) The equipment prints out the scanning compensation data list containing the following:
a) White level data (208 bytes)
b) Black level data (1 byte)
c) White level data for compensation operation of background color (100 bytes)
d) Initial clamp PWM value (1 byte)
e) Clamp PWM value (1 byte)
f) Compensation data for background color (1 byte)
g) Upper and lower limit data for the compensation factor of background color (2 bytes)
h) Initial LED light intensity value (1 byte)
i)
LED light intensity value (1 byte)
j) LED light intensity value on the white film of the document pressure bar ASSY and
documents (2 bytes)
k) Document rear sensor adjustment value (1 byte)
(3) Upon completion of recording of the compensation data list, the equipment returns to the initial
stage of the maintenance mode.
NOTE: If any data is abnormal, its code will be printed in inline style, as shown on the next page.