Brother FAX 560, Руководство по обслуживанию

Страница: 134 / 194

VI - 1
1. ERROR INDICATION
To help the user or the service personnel promptly locate the cause of a problem (if any), the
facsimile equipment incorporates the self-diagnostic functions which display error messages for
equipment errors and communications errors.
For the communications errors, the equipment also prints out the transmission verification report
and the communications list.
1.1 Equipment Errors
If an equipment error occurs, the facsimile equipment emits an audible alarm (continuous beeping)
for approximately 4 seconds and shows the error message on the LCD. For the error messages,
see [ 1 ] below. As one of the error messages, “MACHINE ERROR _ _” includes an error code
which indicates the detailed error causes listed in [ 2 ].
To display an error code for the other latest error message or detailed message, make the
equipment enter the maintenance mode and press 8 and 2 keys (for details, refer to Chapter V ,
Section 3.12).
[ 1 ] Error messages on the LCD
Models except FAX-T78
Messages on the single-row LCD
On early models On recent models
Probable Cause
The ribbon sensor detects that no ribbon cartridge is
loaded or the ink ribbon has run out.
(NOTE 1)
The registration sensor detects paper present when
no paper should exist at the sensor detection area.
(NOTE 1)
The registration sensor detects no paper when paper
should be fed in FAX reception, in copying, or in
list/report output.
In the scanning compensation data list printed by the
maintenance-mode function code 05, less than fifty
percent of the white level data is faulty.
(This message may appear only in the maintenance
mode.)
(NOTE 1) If a recording paper feeding or ejecting error occurs in the maintenance mode , this paper-related error
message will not appear on the LCD but some 4-digit error code listed on page VI-6 will appear instead.