24
5
Entering Fax mode
5
To enter fax mode, press
(
Fax
), and the
key will glow green.
The LCD will show the new job number and
the memory available.The number of pages
you can scan into the memory will vary
depending on the data that is printed on them.
Faxing from the ADF
5
a
Make sure you are in Fax mode
.
b
Put the document face down in the ADF.
c
Dial the fax number.
d
Press
Mono Start
or
Colour Start
.
The machine starts scanning the
document.
Note
• To cancel, press
Stop/Exit
.
• If the memory is full, the document will be
sent in real time.
Faxing from the scanner glass
5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for colour
faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a
Make sure you are in Fax mode
.
b
Load your document on the scanner
glass.
c
Dial the fax number.
d
Press
Mono Start
or
Colour Start
.
If you press
Mono Start
, the
machine starts scanning the first
page. Go to step
.
If you press
Colour Start
, the
machine starts sending the
document.
e
Do one of the following:
To send a single page, press
2
to
choose
No
. (or press
Mono Start
again).
The machine starts sending the
document.
To send more than one page, press
1
to choose
Yes
and go to step
.
f
Put the next page on the scanner glass.
Press
OK
.
The machine starts scanning the page.
(Repeat step
and step
for each
additional page.)
Note
If the memory is full and you are faxing a
single page, it will be sent in real time.
Sending a fax
5