Brother E300 Скачать руководство пользователя страница 42

Страница: 42 / 60

Label Preview

LABEL PRINTING

You can preview the current page and check the layout before printing.

Press the

Preview

key.

An image of the label is displayed on the screen.

The length of the label is shown in the lower-right corner of the screen.

Press the or key to scroll the preview to the left or right.

Press the or key to change the preview magnification.

Labels can be printed once text entry and formatting is complete.

Printing a single page

Press

Print

key to start printing.

Printing a range of page

When there are multiple pages, you can specify the range of pages to print.

Press the

Print

key. The screen where you specify the range is displayed.

Select “All”, “Current” or “Range” by using or key. If you select “All” or “Current”,

go to step 4.

Specify the first page and the last page.

Press the

Enter

key to print.

Label Preview

• Press the

Escape

Enter

key to return to the text entry screen.

• To scroll the preview to the left or right end, press the

Shift

key and then press the or key.

• To print the label directly from the preview screen, press the

Print

key or open the print options

screen and select a print option. Refer to “Printing a Label” below for details.

• The print preview is a generated image of the label, and may differ from the actual label when printed.

Printing a Label

•

Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to

discharged with the tape, making the tape no longer usable.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.

• Be sure to check that there is enough tape remaining when printing several labels

continuously. If tape is running low, set fewer copies, print labels one at a time,

or replace the tape cassette.

• Striped tape indicates the end of the tape cassette. If this appears during printing,

press the Power key to turn the P-touch off. Attempting to print with an empty

tape cassette may damage the labelling system.

Blank pages are not printed.

Содержание E300





























































Результаты поиска

Содержание E300

Отзывы:

Бренды по названию

Популярные бренды

Brother E300, Руководство пользователя

Результаты поиска

Содержание E300

Отзывы:

Бренды по названию

Популярные бренды