manualshive.com logo in svg

Brother E300, Руководство пользователя

Поделиться
Скачать
Brother E300 Скачать руководство пользователя страница 13

1

2

3

4

5

6

7

8

9

11

z

 IN

TRO

DUC

TI

O

N

Symbols Used in this Guide

• Any data stored in memory will be lost due to failure or repair of the P-touch, or if the battery 

expires.

• When power is disconnected for more than two minutes, all text and format settings will 

be cleared. Any text files stored in the memory will also be cleared.

• A protective clear plastic sticker is placed over the display during manufacturing and 

shipping. This sticker should be removed prior to use.

• The length of the printed label may differ from the displayed label length.
• You can also use Heat Shrink Tube in this model. Check the Brother website 

(http://www.brother.com/) for further information. You may not be able to use some print 

frame, or font settings when using Heat Shrink Tube.

• The P-touch is not equipped with a charging feature for Ni-MH rechargeable batteries.
• The printed label may differ from the image that appears on the LCD.
• Note that Brother Industries, Ltd. does not assume responsibility for any damage or injury 

arising from the failure to follow the precautions listed in this manual.

• We strongly recommend that you read this User’s Guide carefully before using your P-touch, 

and then keep it nearby for future reference.

The following symbols are used throughout this guide to indicate additional information.

Symbols Used in this Guide

: This symbol indicates information or directions that may result in damage or injury if 

ignored, or operations that will result in errors.

: This symbol indicates information or directions that may help you understand and use 

the P-touch more efficiently.

Содержание E300





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды