Brother E-100M Скачать руководство пользователя

Страница: 49 / 66

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

STOPPING AND CONTINUING EMBROIDERING

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

Press the

key to go back to the point

where sewing stopped.

Align the hole in the thread cartridge slot (shown by the
arrow at the right) with the point where sewing stopped.
Go back a little before the point where sewing stopped
so the stitches will overlap a little.

Press the

key.

The screen displayed in step 1 appears again.

Insert the thread cartridge, and then press the

key to continue sewing.

Key information

•

If you go back too far, press the

key.

NOTE

•

If the screen shown at the right appears, the
thread cartridge was not removed. Remove
the thread cartridge.

•

If it is difficult to find the point where sewing
stopped, insert the thread cartridge, and then
align the needle with the desired position.

Key information

•

Pressing the

key goes back to step

•

To go back to step

, press the

key.

NOTE

•

If embroidering is stopped and restarted, some extra needle holes may be punched in the
pre-cut design fabric, but it can still be used.

•

If you wish to remove the design frame, press the

key, and then pull it out. (See the

section

Removing the design frame

on page 44.) Before continuing embroidering, be sure

to insert the design frame with the correct side facing up.

Содержание E-100M



































































Результаты поиска

Содержание E-100M

Отзывы:

Похожие инструкции для E-100M

Бренды по названию

Популярные бренды

Brother E-100M, Руководство по эксплуатации

Результаты поиска

Содержание E-100M

Отзывы:

Похожие инструкции для E-100M

Бренды по названию

Популярные бренды