For additional help or other inquiries please contact our Brother Support Center
http://www.brother-usa.com/Support/
Call: 1-877-BROTHER (877-276-8437) M-F, 9:00am to 6:00pm Eastern Time
12
optional deep cut blade can cut up to 1.5mm thick, materials like foam, leather,
poster board, etc.
Does the DesignNCut allow for cutting multiple layers of fabric?
No. The machine does not cut multiple layers of fabric. However, if working on
large projects, you can cut many pieces out by using the 12” x 24” cutting mat.
How do I know the blade is cutting in the proper direction each time?
DesignNCut adjusts the blade’s direction each time before it starts to cut. You
will notice small notches above the ruler in your mat and this is the process of
the machine making sure the blade is in the proper direction each time.
How many layers of fabric can I cut?
For best results, only one layer of fabric can be cut with DesignNCut. The fabric
must be adhered to the standard mat using the fabric support sheet. Mats are
also available in a 12 in x 24 in format for mass cutting or cutting larger images.
How long will the blade last?
The blades longevity will depend on the use and frequency of use of each
blade.
