5
10.2 in.
(259 mm)
10.2 in.
(259 mm)
1.9 in.
(48 mm)
36.7 in.
(932 mm)
2
Using a 5/16 in. (8 mm) drill bit, drill a hole at each point marked on the
wall.
3
Insert one of the enclosed anchors into each hole, and then push it into
the wall until the teeth on the rim firmly grip the wall.
4
Tighten each screw (by turning it clockwise)
approximately 20 turns.
a
The screws must be tightened by hand.
Do not use an electric screwdriver,
otherwise the copyboard may fall down.
PUSH
Position of the wall-mounting bar in relation to the copyboard
2. Setup
