Brother BES-116, Инструкция по эксплуатации

Страница: 151 / 153

BES-116AC
149
Connection and Installation of Optional Equipment
Winding lower thread
1. Turn on the power switch.
2. Fit bobbin
q
to the bobbin winder shaft
w
.
3. Pass a thread through thread guide
e
.
4. Wind the thread around bobbin
q
several times in the direction of the arrow.
5. Press bobbin hold
r
.
Note) • If the thread cannot be wound evenly, loosen screw
t
and move thread guide
e
from side to side for
adjustment.
• To wind more thread around the bobbin, loosen screw
y
and shift bobbin hold
r
.
6. After winding is finished, remove the bobbin from the bobbin winder shaft and trim the thread
using tread trimmer
u
.
Note) • If the thread passed though thread guide
e
comes off, loosen knob
i
. If the thread is wound loosely,
tighten knob
i
.
• If circuit protector
o
is activated, the bobbin winder motor does not rotate. Wait for a while until the
motor cools and press the circuit protector. (If the motor is still hot, the pressed circuit protector will
come out.)
w
q
o
r
y
u
t
e
i