Brother BE-438D, Инструкция по эксплуатации

Страница: 43 / 66

5. USING THE OPERATION PANEL (BASIC OPERATIONS)
36
KE-430D, BE-438D
5-7. Adjusting the work clamp / button clamp lift amount
The setting for the work clamp/button clamp lift amount can be changed using the operation panel.
1
Carry out home position detection.
2
THREAD/CLAMP indicator lights
Menu indicators switch off
Press the THREAD/CLAMP key.
The sewing machine will switch to threading mode.
• “ 1” will appear in the PROGRAM No. display, and the
work clamp / button clamp will be lowered.
3
Press the key.
The sewing machine will switch to work clamp height setting
mode.
• " 2" will appear in the PROGRAM No. display and the work
clamp/button clamp will rise to the setting value that appears in
the menu display. (Work clamp height setting values KE-430D:
10 - 17, BE-438D: 6 - 13)
Note:
If you press the key before home position detection has
been carried out, the sewing machine will not switch to work
clamp height setting mode. (The buzzer will sound.) Press the
THREAD/CLAMP key to end setting mode and then repeat
the procedure from step 1.
Press the or key to set the work clamp height.
• The work clamp/button clamp will rise or drop to the height of
the new value that has been set.
When memory switch no.003 is "ON"
Press the key.
The sewing machine will switch to intermediate work clamp
height setting mode.
• " 3" will appear in the PROGRAM No. display and the
work clamp/button clamp will move to the setting value that
appears in the menu display.
(Intermediate work clamp height setting values KE-430D:
1 - 17, BE-438D: 1 - 13)
Press the or key to set the intermediate work clamp
height.
• The work clamp/button clamp will rise or drop to the height
of the new value that has been set.
<Switching modes>
[ 2] Work clamp height setting mode
↓ ↑
( [ 3] Intermediate work clamp height setting mode)
↓ ↑
[ 1] Threading mode
4
Ending setting mode
THREAD/CLAMP indicator switches off
Press the THREAD/CLAMP key.
• The setting values will be memorized.
• The work clamp/button clamp will return to the status that it was at
before the sewing machine was switched to setting mode.
4445Q
All indicators switch off
4441Q
4446Q
4447Q
4448Q