Brother BE-438D Скачать руководство пользователя страница 39

Страница: 39 / 66

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

KE-430D, BE-438D

(10) X-SCALE indicator

Illuminates when the SELECT key (15) is pressed to shown the X-scale setting.

(11) Y-SCALE indicator

Illuminates when the SELECT key (15) is pressed to shown the Y-scale setting.

(12) SPEED indicator

Illuminates when the SELECT key (15) is pressed to shown the sewing speed setting.

(13) COUNTER indicator

Illuminates when the SELECT key (15) is pressed to shown the lower thread or production counter setting.

(14) SPLIT No. indicator

Illuminates when the SELECT key (15) is pressed to show the split setting when split data (for specifying a pause while the

program is running) exists.

(15) SELECT key

Used to select a menu (X-scale, Y-scale, sewing speed and counter).

(16) Menu display

Displays information such as menu setting values, memory switch settings and error codes.

(17) Setting keys

Used to change the value which is displayed in the menu display (16).

(18) PROGRAM No. display

Displays information such as program numbers.

(19) Setting keys

Used to change the value which is displayed in the PROGRAM No. display (18).

(20) CF media indicator

Illuminates when a CF card (external media) is inserted.

(21) FD media indicator

Spare

(22) Function keys [F1, F2, F3, F4]

Used to select user programs and to set and select cycle programs.

(23) R/W key

Used to read data from and write data to external media.

is a trademark of SanDisk Corporation.

Содержание BE-438D



































































Результаты поиска

Содержание BE-438D

Отзывы:

Brother BE-438D, Инструкция по эксплуатации, Страница: 39 / 66

Результаты поиска

Содержание BE-438D

Отзывы: