LCD
B-12
1
Select the needle stop position (the needle position for when the machine is not being operated) to be up or down.
2
Select either “1 Straight stitch (Left)” or “3 Straight stitch (Middle)” as the utility stitch that is automatically selected when the
machine is turned on.
3
Set to “ON” when using twin needle. For details, refer to “Using the twin needle” on page B-25.
4
Allows the stitch width to be adjusted using the sewing speed controller. For details, refer to “Satin stitching using the sewing
speed controller” in the “Sewing” section.
5
Adjust the presser foot pressure. The higher the number, the greater the pressure will be. For details on this function, refer to
“Adjusting the presser foot pressure” on page B-42.
6
Specifies whether or not a beep is sounded with each operation. For details, refer to “Operation beep” in the “Appendix” section.
7
Switches the needle area and work area lights to remain “ON” or “OFF”.
8
Adjusts the brightness of the LCD.
9
When set “ON”, reinforcement stitches are sewn at the beginning and/or end of sewing for a reinforcement stitch pattern, even
when the reverse button is pressed. For details, refer to “Automatic reinforcement stitching” on page B-37.
0
Select the level of the input sensitivity for operation keys. For details, refer to “Adjusting input sensitivity for operation keys” on
page B-13.
A
Selects the display language. For details, refer to “Choosing the display language” on page B-13.
B
Displays the program version.
Memo
• Press
to return to the original screen.
1
2
3
4
5
6
7
8
9
0
A
B
Содержание 888-F42
