Brother 885-V15, Руководство по эксплуатации

Страница: 53 / 112

51
2
Pulling up the bobbin thread
When making gathers or before free-motion quilting, first pull up the bobbin thread as described below.
a
Insert the bobbin into the bobbin case.
• Refer to steps
a
through
d
of “Installing the
bobbin” on page 18.
b
Pass the bobbin thread through the slot.
Do not cut the thread with the cutter.
• Leave the bobbin cover removed.
c
Turn on the sewing machine.
d
Lightly hold the end of the upper thread.
a Upper thread
e
With the needle raised, press (needle
position button) twice.
a Needle position button
f
Carefully pull the upper thread upward to pull
out the end of the bobbin thread.
a Upper thread
b Bobbin thread
g
Pull out about 10 cm (4 inches) of the bobbin
thread under the presser foot toward the rear
of the machine.
a Upper thread
b Bobbin thread
h
Turn off the sewing machine.
i
Reattach the bobbin cover.
Insert the tab in the lower-left corner of the
bobbin cover (A), and then press down on the
right side (B).
a
a
b
a
b
A A
B