Brother 885-V15, Руководство по эксплуатации

Страница: 25 / 112

23
1
o
While lowering the needle threader lever,
hook the thread onto the guide.
a Needle threader
b Thread
c Guide
p
Catch the thread on the hook as shown below.
a Needle threader lever
q
Raise the needle threader lever, and then pull
the end of the thread which passed through
the eye of the needle.
r
Raise the presser foot lever, pass the end of
the thread through the presser foot, and then
pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
a 5 cm (2 inches)
X
The upper threading is finished.
■
Manually threading the needle
When using specialty thread, such as transparent
nylon thread or metallic thread, a wing needle or
a twin needle which cannot be used with the
needle threader, thread the needle as described
below.
a
Thread the machine to the needle bar thread
guide, as described in steps
a
through
m
of
“Threading the upper thread”, and then lower
the presser foot lever.
b
Manually pass the thread through the eye of
the needle from front to back.
CAUTION
●
Be careful not to pull on the thread with force
or it may bend the needle.
a
CAUTION
●
Do not touch the (start/stop button),
(needle position button) or (reverse/
reinforcement stitch button). If one of the
buttons is accidentally pressed, the machine
will begin sewing and your finger may be
pricked with the needle or the needle may
break.
a