Brother 885-V15, Руководство по эксплуатации

Страница: 52 / 112

SEWING BASICS ———————————————————————————————————————————————————————————————————————————————————————————————————————
50
Sewing hook-and-loop
fastener
Note
●
Before start sewing, baste together the fabric
and the hook-and-loop fastener.
Make sure that the needle passes through the hook-
and-loop fastener by turning the handwheel and
lower the needle into the hook-and-loop fastener
before sewing. And then, sew the edge of the hook-
and-loop fastener at a slow speed.
If the needle does not pass through the hook-and-
loop fastener, replace the needle with the needle for
thick fabrics (page 28).
a Edge of the hook-and-loop fastener
CAUTION
●
Use only the ungummed hook-and-loop
fastener which is for sewing. If the glue is
attached to the needle or the bobbin hook
race, it may cause malfunction.
●
If the hook-and-loop fastener is sewn with the
thin needle (65/9-75/11), the needle may
bend or break.