Brother 882-W30 Скачать руководство пользователя страница 182

Страница: 182 / 236

USING THE MEMORY FUNCTION

180

Insert the USB media into the USB port on
the machine.

USB port

Press .

Press

when connecting the USB media to the

USB port for mouse.

Press

to return to the original screen without

saving.



The “Saving…” screen is displayed. When the stitch
pattern is saved, the display returns to the original
screen automatically.

Retrieving Stitch Patterns from
the Machine’s Memory

Press .



The pocket selection screen appears.

Choose a stitch pattern to retrieve.

If the entire saved stitch pattern is not displayed,
press the thumbnail.

Saved stitch patterns



The selected stitch pattern is retrieved and the
sewing screen will be displayed.

Note

• Do not insert or remove USB media while

“Saving…” screen is displayed. You will
lose some or all of the stitch pattern you are
saving.

Содержание 882-W30













































































































































































































































Результаты поиска

Содержание 882-W30

Отзывы:

Brother 882-W30, Инструкции по эксплуатации, Страница: 182 / 236

Результаты поиска

Содержание 882-W30

Отзывы: