manualshive.com logo in svg

Brother 882-C40, Руководство по эксплуатации

Брат 882-C40 - это мощный и надежный принтер для офисного использования. Для того чтобы ознакомиться с подробной информацией об использовании устройства, вам необходимо скачать операционное руководство. Скачивайте его бесплатно с manualshive.com. Получите наш мануал прямо сейчас!

Поделиться
Скачать
background image

ERROR MESSAGES

A-36

The pockets are full. Delete a pattern.

This message is displayed when the memory is full and a 
pattern must be deleted.

The safety device has been activated.Is the thread tangled? Is 
the needle bent?

This message is displayed when the motor locks due to 
tangled thread or for other reasons related to thread delivery.

The shutoff support mode has been activated. Turn off the 
machine.

This message appears when the machine is in the shutoff 
support mode. Turn off the machine once to start the machine 
again. (see page B-32)

The “Start/Stop” button does not operate with the foot 
controller attached. Remove the foot controller.

This message is displayed when the “Start/Stop” button is 
pushed to sew Utility stitches or Character/Decorative stitches 
while the foot controller is connected.
(This message does not appear when embroidering).

The upper thread may not be threaded correctly. Thread the 
upper thread from the beginning. 

This message is displayed when it seems that the upper 
thread has not been threaded correctly.

The USB media was changed. Do not change the USB media 
while it is being read. 

This message is displayed when you attempt to select a 
pattern after the USB media in which the pattern is saved has 
been changed.

There is no needle plate cover. Attach a needle plate cover.

This message is displayed when the needle plate cover is not 
attached.

This file cannot be used.

This message appears if the file format is incompatible with 
this machine. Check the list of compatible file formats. (see 
page S-94)

This file exceeds the data capacity and cannot be used. Use a 
suitable size file.

This message is displayed when the file size exceeds the data 
capacity of the machine.
Confirm the file size and format. (see page S-95)

This function cannot be used while in the sensor mode.

This message appears when the selected function is not 
available with the sensor function. (see page B-71)

This key cannot be used at this time.

This message is displayed when you press 

 in 

the screen other than the Utility Stitch, or press 

 in the screen other than the Utility Stitch or 

Character/Decorative Stitch.

This key does not operate when the needle is down. Raise the 
needle and press the key again. 

This message is displayed when a key on the LCD display is 
touched while the needle is in the down position.

This pattern cannot be sewn with this mode. 

This message is displayed when the selected stitch is not 
available for the specific function.

This stitch is not “Dual Feed Mode” compatible.

This message appears when the dual feed foot cannot be used 
with the current stitch. Select other stitch. (see page B-67)

This USB media cannot be used. 

This message is displayed when you try to use incompatible 
media.

This USB media is incompatible. 

This message is displayed when you try to use incompatible 
USB media. For a list of compatible USB media, visit 
“ http://solutions.brother.com ”.

Transmitting by USB 

This message is displayed while the USB media is 
transmitting.

Turn off the power and replace the needle plate. 

This message is displayed when you try to sew with a stitch 
other than a middle needle position stitch while the single-hole 
needle plate is installed.
This message is displayed when the needle plate is removed 
with the machine on or when the machine is turned on and 
“Embroidery” or “Embroidery Edit” mode is selected (see page 
B-24).

USB media error 

This message is displayed when an error occurs with the USB 
media.

USB media is not loaded. Load USB media.

This message is displayed when you try to recall or save a 
pattern while no USB media is loaded.

Use the presser foot lifter button to lower the presser foot.

This message is displayed when a button, such as the 
“Start/Stop” button, is pushed while the presser foot is raised.

Marks

Error Messages

Cause/Solution

Содержание 882-C40













































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 882-C40

Canon SmartBase PC1270D Fax Manual preview
SmartBase PC1270D
Бренд: Canon Страницы: 88
Kangaroo Sydney Assembly Instructions Manual preview
Sydney
Бренд: Kangaroo Страницы: 36
MAGIC FX SMOKEJET User And Installation Manual preview
SMOKEJET
Бренд: MAGIC FX Страницы: 20
Duerkopp Adler 1183i-7 Instructions For Service Manual preview
1183i-7
Бренд: Duerkopp Adler Страницы: 35
Pure Fitness 8637MS Owner'S Manual preview
8637MS
Бренд: Pure Fitness Страницы: 12
U.S. Products Agitator 20 Information & Operating Instructions preview
Agitator 20
Бренд: U.S. Products Страницы: 10
zika MIG-350 Owner'S Manual preview
MIG-350
Бренд: zika Страницы: 21
PFX Jet Blaster 900 Instruction Manual preview
Jet Blaster 900
Бренд: PFX Страницы: 9
Mac Mah FOGSPRAY 3000 RGB User Manual preview
FOGSPRAY 3000 RGB
Бренд: Mac Mah Страницы: 31
Zenit Powertools mma-250/3 Instruction Manual preview
mma-250/3
Бренд: Zenit Powertools Страницы: 10
GBC PF3200 Operation Manual preview
PF3200
Бренд: GBC Страницы: 18
JUKI AB-1351 Instruction Manual preview
AB-1351
Бренд: JUKI Страницы: 149
Happy HCG Series Instruction Book preview
HCG Series
Бренд: Happy Страницы: 98
JUKI APW-896N/IP-420 Instruction Manual preview
APW-896N/IP-420
Бренд: JUKI Страницы: 142
JUKI AMS-221F3020RSW/AW-3 Instruction Manual preview
AMS-221F3020RSW/AW-3
Бренд: JUKI Страницы: 163
JUKI HZL-E61 Service Manual preview
HZL-E61
Бренд: JUKI Страницы: 24
JUKI HZL-30Z Instruction Manual preview
HZL-30Z
Бренд: JUKI Страницы: 44
artisan TORO 4011 LA-37 Operator'S Manual preview
TORO 4011 LA-37
Бренд: artisan Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды