Brother 2060, Руководство по обслуживанию

Страница: 26 / 171

II-9
3.2.3 Transfer stage
In the transfer stage, the toner image is transferred from the drum surface to the paper.
Step 4 Transfer
Photo-
sensitive
drum
Paper
Transfer charging roller
Figure 2.13
A positive charge applied to the back of the paper attracts the negatively charged toner
particles to the paper. The printer accomplishes transfer by using the charging roller
method. Advantages compared with the corona transfer method are as follows:
•
Low transfer voltage that is less than half that for corona transfer.
•
Less ozone generation.
•
The paper is supported by the transfer charging roller and photosensitive drum, so
feed is more stable.
Reference:
If the image on the photosensitive drum is not completely transferred to the paper due to
jamming, etc., the toner may adhere to the transfer charging roller. The printer removes
the toner from the transfer charging roller by switching the transfer voltage between
positive and negative in sequence. During wait, initial rotation, and last rotation, the
printer sets the primary DC voltage to zero, and sets the charge on the drum to zero. In
this case, the transfer voltage is made negative to remove the negatively-charged toner
on the transfer charging roller to the drum. The transfer charging roller is thus cleaned.
Step 5 Separation
Photo-
sensitive
drum
Paper
Transfer charging roller
Static charge
eliminator
Figure 2.14
The stiffness of the paper causes it to separate from the drum. (Curvature separation)
To stabilize the paper feed and prevent small white circles from appearing in the printed
image at low temperature and humidity, the charge on the back of the paper is reduced
by the static charge eliminator after transfer.