Endure Balanced Flue
23
Servicing Instructions
Removal of gas components
1. Remove the control knob from the valve
2. Remove the locknut from the front of the valve
3. Undo the three nuts around the periphery of the valve body
– Gas Inlet / Burner /
Pilot
4. Remove the thermocouple nut from the back of the valve
5. The valve can be removed and serviced / reapiers as necessary
6. Re-assemble in reverse order
7. Re-assemble the burner tray in the fire box (see previous page)
Replacement of the pilot
1. Remove the two (2) screws from the underside of the tray to release the pilot
2. Undo the pilot gas supply from the base of the pilot
3. Remove the thermocouple nut from the back of the valave
4. Remove the ignitor lead from the base of the igniter
5. The pilot assembly can now be removed and replaced
6. Re-assemble in reverese order
7. Re-assemble the burner tray into the firebox (see previous page)
Replacement of the injector
1. Remove the burner from the burner tray, including the burner front plate
2. Unscrew the injector nipple from the elbow fixed to the burner tray
3. The injector can now be removed and replaced
4. Re-assemble in reveres order
5. Re-assemble the tray into the fire box (see previous page)
Only replacement components supplied by the manufacturer should be used in the
service of this appliance
