5
• ALWAYS handle Li-Po batteries with extreme caution . NEVER place the Li-Po
helicopter battery in a place where the contact tabs could inadvertently be connected
to each other via coins, keys, tools or any other metallic objects . If anything happens
to complete the circuit across the connect tab, the batteries will likely be damaged
and may cause injury .
• Do not directly solder the battery or pierce it with a nail or other sharp object .
• Do not short circuit the battery’s supply terminals .
• Do not disassemble or alter the battery .
• Charge the battery every six months .
• Recycle used batteries after covering the battery terminals with insulation tape or
inserting the battery into an individual polybag .
remOte CONtrOl BatterIeS
Remote control requires 6 AA batteries (not included) . Please read the important
battery safety warning below .
1 . Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (Nickel
Metal Hydride) .
2 . Do not mix old and new batteries .
3 . Non-rechargeable batteries are NOT to be recharged .
4 . Exhausted batteries should be removed immediately and must be recycled
or disposed of properly according to state or local government ordinances
and regulations .
5 . The supply terminals are not to be short-circuited .
6 . Only batteries of the same or equivalent type as recommended are to be used .
7 . Batteries are to be inserted with the correct polarity (see inside this manual
for diagram) .
8 . Do not dispose of batteries in a fire as batteries may leak or explode .
