6. While holding MTH/DATE, press UP to set the display to the correct month
and date. The Day indicator will change automatically as you adjust the
month/date settings. When the correct month and date appear on the
display, release the buttons.
7. Press TIME and UP to set the display to the correct time. Be sure to
confirm that you have set the time correctly to ‘AM’ or ‘PM’ by observing
the AM indicator.
8. After you set the time, reconfirm that the Day and Month/Date displays are
still correct.
The SmartSet
®
clock memory is now reset and the new lithium battery will
maintain it for the next five to eight years, depending on the number and
duration of power outages you experience.
Note:
After resetting the clock, don’t forget to reset your alarm settings as well.
Dimmer Control
The Dimmer control was set to High at the factory. If you find the clock
display is too bright in a darkened room, slide the Dimmer switch to Low.
RADIO OPERATION
Listening to the Radio
1. Press RADIO ON/OFF to turn the radio on. The radio dial pointer will light.
2. Set the Band selector to the desired band, AM or FM.
3. Select your desired station with TUNING.
18
CAUTION
Use of controls or adjustments to the product and procedures other than
those specified herein may result in hazardous radiation exposure.
FCC INFORMATION
This product has been tested and found to comply with the limits for a class B
digital Device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television
reception, which can be determined by turning the product off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the product and receiver.
•
Connect the product to an outlet on a circuit different from which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
291070 SmartSet Clock Radio Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black
7
291070_INS_SmartsetCloRad NEWT 10/3/02 9:38 AM Page 13
