CLOCK/ALARM OPERATION
Setting the Time
The first time you connect your new SmartSet
®
Clock Radio to the AC outlet,
the internal computer will automatically set the time correctly for the Eastern
Time Zone, which is the initial default setting. The display will scan for a few
seconds and then show the correct month, date, day and time in the Eastern
zone. If you live in the Eastern Time zone, there’s nothing else to do. Your
clock is set correctly and running.
If you do not live in the Eastern Time zone you must change the default zone
display to your own zone. You only do this one time and the SmartSet
®
will
remember the new default time zone setting and will always return to that
setting after a power interruption.
There are seven time zones programmed into your SmartSet
®
Clock Radio,
as follows:
Zone 1 - Atlantic Time
Zone 5 - Pacific Time
Zone 2 - Eastern Time
Zone 6 - Yukon Time
Zone 3 - Central Time
Zone 7 - Hawaiian Time
Zone 4 - Mountain Time
Changing the Default Time Zone Display
•
Press TIME ZONE. The number “2” will appear on the display indicating that
the default zone is Zone 2, Eastern Time.
291070 SmartSet Clock Radio Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black
13
FRONT PANEL
18. AM Indicator
19. ALM 1 ‘On’ Indicator
20. Time/Date Display (LCD Display)
21. ALM 2 ‘On’ Indicator
22. Low Battery Indicator
23. Day Indicators
24. Tuning Dial
25. Lighted Dial Pointer
BACK PANEL
26. Battery Compartment
27. AC Power Cord
SAVE THESE INSTRUCTIONS
12
291070_INS_SmartsetCloRad NEWT 10/3/02 9:38 AM Page 23
