SPECIFICATIONS
Speaker -
Power Supply: 5V 500mA
Total Output: 5 Watts
Range: Class 2, up to 33 ft (10 m)
Li-ion Rechargeable Battery: 2200mAh
Speaker Driver: Dia. 3.5 inch, 4 Ohm
Charging Time: Approx. 5.5 hours
Battery Life: Approx.
8
hours
Compatibility: Bluetooth
®
2.0 or above
device with A2DP/AVRCP
Medium Globe –
Power Supply: 5V 400mA
Li-ion Rechargeable Battery: 700 mAh
Charging Time: Approx.
2
hours
Battery Life:
Approx. 4 hours (LAMP mode)
Approx. 12 hours (BEAT mode)
Small Globe –
Battery Life:
Approx.
4
hours (LAMP mode)
Approx. 13 hours (BEAT mode)
The Bluetooth
®
word mark and logos
are registered trademarks owned of
Bluetooth
®
SIG, Inc. and any use of
such marks by Brookstone is under
license.
© Brookstone 2016
2. Double tap to enter
MOOD
LIGHT
mode. The light will turn into
changing rainbow color.
NOTE: Tap the LIGHT CONTROL ZONE
once to select the specified single
light color within the first two rainbow
light cycles.
3. Triple tap to enter
BEAT
mode. The
light will flash red 4 times to indicate
entering
BEAT
mode. When the
music is on, the changing rainbow
light will dance to the music.
NOTES:
• The light will turn into changing
rainbow color if no audio signal is
streaming to the speaker.
• Turn up the music volume to make
the beating light more visible.
4. Quadruple tap to enter
PARTY
mode. The light will flash white 4
times to indicate entering
PARTY
mode. When the music is on, the
strobe light will dance to the music.
NOTES: • The light will turn into changing
rainbow color if no audio signal is
streaming to the speaker.
• Turn up the music volume to make
the strobe light more visible.
5. A single tap again in the Light Control
Zone will turn the light off.
LISTENING TO YOUR
AUDIO DEVICE
1. Play your audio device as you
normally would.
2. Volume is adjusted on your
audio device.
3. To pause audio, press the Power
Button on the Speaker. To resume
audio playback, press the Power
Button again.
4. Press and hold the Power Button on
speaker for 3 seconds. The speaker
will sound a tone and power off.
TURNING ON/OFF LIGHT
EFFECT (MASTER SPEAKER)
1. Tap once in the Light Control Zone
to turn the light on
and enter the
LAMP mode.
TURNING ON/OFF LIGHT
EFFECT (SMALL GLOBE)
1. Slide the Power Switch to ON.
2. The globe will automatically sync
to the master speaker.
3. Use the master speaker to control
the light effect of the globe.
See steps under
TURNING ON/OFF
LIGHT EFFECT (MASTER SPEAKER)
.
4. Slide the Power Switch to OFF
to turn the globe off to save
battery power.
NOTE: You can sync unlimited globes to
the speaker. Additional globes
(SMALL/MEDIUM) are available
for purchase in store.
TURNING ON/OFF LIGHT
EFFECT (MEDIUM GLOBE)
1. The globe will automatically sync
to the master speaker.
2. Use the master speaker to control
the light effect of the globe.
See steps under
TURNING ON/OFF
LIGHT EFFECT (MASTER SPEAKER)
.
CARE AND STORAGE
Store the speaker and globes in a
cool, dry place
Merrimack, New Hampshire, USA 03054
800-846-3000 • Brookstone.com
318025
• 318024 • 318026
