2-2
Model 0254
Section 2 Installation
Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
2-4 Return Shipment
Prior to returning any instrument to the factory, contact your nearest Brooks
location for a Return Materials Authorization Number (RMA#). This can be
obtained from one of the following locations:
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: [email protected]
www.BrooksInstrument.com
Brooks Instrument
Brooks Instrument
Neonstraat 3
1-4-4 Kitasuna Koto-Ku
6718 WX Ede, Netherlands
Tokyo, 136-0073 Japan
P.O. Box 428
Tel +81 (0) 3 5633 7100
6710 BK Ede, Netherlands
Fax +81 (0) 3 5633 7101
Tel +31 (0) 318 549 300
Email: [email protected]
Fax +31 (0) 318 549 309
E-mail: [email protected]
2-5 Transit Precautions
To safeguard against damage during transit, transport the instrument to the
installation site in the same container used for transportation from the
factory if circumstances permit.
2-6 Removal from Storage
Upon removal from storage, a visual inspection should be conducted to
verify the condition of the equipment is “as received.”
2-7 Ventilation and Mounting Requirements
Because of the low power consumption of the Model 0254, it does not
have ventilation requirements. However, the ambient temperature
surrounding the Model 0254 should not exeed 122°F (50°C). The optional
power supply modules are also ventilation-free and limited to an ambient
temperature of 122°F (50°C).
2-8 Cleaning Instructions
Do not use cleaning agents other than water because this might affect
color and marking of the equipment.
Use a clean, soft and damp cloth for cleaning.